krix_seismix3_subwooferKrix Seismix 3 Subwoofer

300w@4ohm RMS Class D amplifier, 275mm Large throw bass driver with High efficiency, low power usage, high performance. saves you money. Front vented to Release bass energy forward to allow unit to be used inside custom cabinetry. RRP $1,095

Specifications

Frequency Range: 22Hz - 200Hz in room response. Low pass filter 50 - 200Hz, 2nd order. High pass filter to limit driver excursion below 26Hz.
Bass Driver: Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2") voice coil wound on high powered Kapton former, with vented magnet assembly.
Amplifier Power: 300 watts RMS into the nominal 4 ohm driver Maximum instantaneous power 600 watts
Amplifier S/N Ratio: >>85dB
Distortion - Input to Speaker: <0.2% - @ 200 watts RMS
Line Level Inputs: Left Input (mono) – 300mV RMS for maximum output or Left + Right Input (stereo) – 150mV RMS for maximum output
Output: 122dB maximum SPL in room response
Auto Power On / Off: 20 minute delay before switching to standby after no input signal
Phase Select: 0º to 180º continuously variable (relative to input signal)
Enclosure Type: Bass reflex, front vented with internal / external flaring
Dimensions: 450mm high (including feet) x 360mm wide x 410mm deep (including grille)
Material: 17mm MDF
Volume: 43 litres internal
Weight: 18kg