Rega Planar 1 Plus

$749.00

The Rega Planar 1 Plus has all the benefits of the Planar 1 but adds a built in stage so that it will connect directly to any standard Line Level input (eg. AUX input).

Category:

Rega Planar 1 Plus Key Features

  • Built-in Phono Stage: The built-in phono stage is a high specification pre-amplifier. It is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or audio amplifier. This allows simple connection to a wide variety of products using either the standard twin phono to phono lead (supplied) or phono to 3.5 mm plug (not supplied).
  • Tonearm: Brand new RB110 tonearm built with the new Rega designed, bespoke, ultra low friction bearings (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.
  • Cartridge: Rega Carbon cartridge supplied fitted as standard.
  • 24v synchronous motor: The first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.
  • Plinth: Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.
  • Central Bearing housing: Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending)
  • Platter: Brand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability.
  • Re-Designed feet: New improved feet to increase stability and reduce vibration transfer.
  • Motor cover tray: New motor cover tray with integrated cooling.
  • Balance Weight: New 111g ‘Plug and Play’ balance weight.

Technical Specifications

  • Plug and Play design, set-up in less than thirty seconds.
  • Hand assembled RB110 tonearm.
  • High quality, low vibration motor.
  • Phenolic resin, flywheel effect platter.
  • Factory fitted Carbon moving magnet cartridge.
  • Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cm
  • Weight 4.35kg
  • Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a): 370-410 mV
  • Output Impedance: 1 kΩ
  • Frequency Response (pre-amplifier only): 14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point)
  • RIAA Accuracy (pre-amplifier only): (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB
  • Pre-amplifier Gain: 40 dB
  • Pre-amplifier Input Loading: 47 kΩ in parallel with 220 pF
  • Signal to Noise Ratio: -75 dB A-weighted ref maximum output.
  • Power Requirements: 50 Hz 24 V AC 0.142 mA 3.4 W – 60 Hz 24 V AC 0.129 mA 3.1 W

NOTE: For use only with a Rega PS1 350 mA power supply.